Identification at check points in outdoor sport disciplines like MTB Enduro, trail running, orienteering and MTBO is slightly different than in foot orienteering. In general, passing speed is higher and control points are more line elements than filigree objects. The BS11-BS small is specially adapted for these applications by enabling identification over the air. The station is part of SPORTident AIR+ system configuration and can be configured with SPORTident Config+.
The unique design of the BS11-BL large meets requirements for identification at checkpoints in sports like skiing and biking. The SPORTident ActiveCard (SIAC) can register the intermediate and finish times in a range up to 3 meters. The SPORTident Station BS11-BL large features a new body with an increased RFID output. The station can be controlled and also be charged by USB interface.
In Beacon mode, the data record about the passed control stations will be saved in more than one SIAC at the same time. The number of SIACs can be registered simultaneous is unlimited. The BS11-BL large can be configured with the software SI-Config+.
BS11-Loop
The BS11-Loop is developed for width areas, where the 3 meters range of a BS11-BL are not enough. The station comes with a ground antenna, which is plugged in the SI-Station. The SPORTident ActiveCard (SIAC) can register the start, intermediate and finish times in a range up to 6 meters. The station can be controlled and also be charged by USB interface.
The number of SIACs can be registered simultaneous is unlimited. The BS11-Loop large can be configured with the software SI-Config+. The SI-Station only works in combination with the ground antenna.
The SPORTident Station BSF8 is based on a newly developed hardware core. The BSF8 design offers a number of significant improvements with lower power consumption and new features compared with the older series of SPORTident Stations. It becomes more easy to configure since the BSF8 station has top/bottom display and is still compatible with the already existing SPORTident- System equipments.
Additionally, the new BSF8 is also available with short range radio (SRR) which enables wireless transmission of SPORTident data records over distances of up to 8 metres. The radios are working in the licence-free 2.4 GHz radio-band and can be used worldwide. SRR creates a wireless data bridge to a receiver or repeater mounted some metres away by using SRR dongle. SRR dongle receives data records sent from BSF8-SRR and SIAC. The device features an USB interface for easy connection with PC, laptop or other standard communication equipment.
SPORTident BSF8 Master is an extended SPORTident Station. It works and can be configured like any other SPORTident Station. In addition, two new service modes are implemented: “TimeMaster” and “ExtendedMaster”. In operating mode “TimeMaster” the station transmits its clock time to any other SPORTident Station inductive coupled to the SI-Master. So a set of SPORTident Stations can be synchronised very quickly. Also in “ExtendedMaster” mode the SI-Master transmits its clock time to any other SPORTident Station. Additionally, the SI-Master clears the backup memory of the slaved station and transmits its own active time to any other unit.
The SPORTident Station BSM8-USB is based on the BSM7-USB hardware core. The station works and can be configured like other SPORTident Stations. For environmental reasons the station has no internal battery, the power will be provided from the USB port. The new design offers a number of significant improvements and new features compared with the older series of SPORTident Stations. The new BSM8-USB Station is compatible with the already existing SPORTident System and can be used mixed with older equipment.
